The rug tufting machine usually includes a base cloth discharge roller, output roller wool, tufting needles, needle hooks and pile mechanism plates, the wool is conveyed through the line output roller device to feed the output of the tufting needles, and the tufting needles are arranged below the needle plate. The needles, and the corresponding gaps defined by the needle plate, are used to penetrate the output level of the base fabric output from the slip roller along the needle plate base fabric through the upper and lower tufting needles, said setting hook means on the underside of the needle plate pile, In operation, in sliding the backing plate along the needle, while tufting the needle with the vertical movement of the yarn, and through the base fabric, it works like sewing, after which the yarn forms loops through the pile, Hook and pile mechanism tick base fabric, tick pile pile mechanism usually includes a hook knife, and a power seat drive device for moving the seat, but the existing pile hook knife 1”.
A hook is formed in the process of having an upper horizontal side and a lower horizontal side, the front end portion of the upper horizontal side can be bent downward, the rear end portion of the upper horizontal side is connected with the front end portion of the lower horizontal side, and the rear end portion of the lower horizontal side is connected. It becomes the insertion tail. Therefore, when the pile is hooked, the upper horizontal edge is inserted into the pile loop, and the pile is hooked through the hook part, but because the pile loop cannot be completely slipped from the upper horizontal edge after being hooked, The velvet knife 1' also moves back and forth for the duration of the company, that is, after the velvet knife 1' hooks a loop of the robot, everyone must extend it out to hook the next loop, so once the loop is hooked, it cannot be If the twigs come out of the upper horizontal edge in time, they will accumulate on the velvet knife 1', which will affect the velvet knife 1' and can no longer continue to hook the velvet. A straight knife 2', which drives the straight knife 2' to move up and down through data, forms a kind of shearing with the velvet knife 1', and cuts the loop, so that the loop can be released from the velvet knife 1' in time. , it is convenient for the tufting knife 1' to calculate the next tufting operation, but this makes the existing tufting machines in our country only produce the cut pile products that cut the loops by themselves, but cannot produce the products that do not cut the loops. Loop fleece products.
QR Code
